{"id":3907,"date":"2021-10-05T09:13:38","date_gmt":"2021-10-05T16:13:38","guid":{"rendered":"http:\/\/brigadedemo.flywheelsites.com\/?post_type=product&p=3907"},"modified":"2025-06-07T17:21:47","modified_gmt":"2025-06-08T00:21:47","slug":"darche-eclipse-180-awning","status":"publish","type":"product","link":"https:\/\/brigadeoverland.com\/product\/darche-eclipse-180-awning\/","title":{"rendered":"Eclipse 180 Gen 2 Awning (Clearance)"},"content":{"rendered":"
Clearance! Once they’re gone, they’re gone. Scoop up a brand new product for a fraction of the regular price, still with the same great warranty and product support<\/div>\n

Darche’s Eclipse 180 Gen 2 Awning brings next-level shade to your 4WD camping setup. Offering a huge 88 sq-ft of instant cover, it deploys to almost three times its packed width and extends almost 7 feet from your vehicle, giving you greater cover than a standard pull-out awning.<\/span><\/p>\n

Gen 2 features include a redesigned removable 600gsm PVC transit bag with ample room to pack up your awning, and drain holes for any moisture that might stay inside. You can even pack away the additional poles inside the cover.<\/p>\n

Designed for an easy one-person setup, the unit is freestanding during setup and pack down. The heavy-duty swivel hinge system holds the entire kit up while you extend and tension the awning arms and release the pivoting alloy telescopic leg poles stowed along the rafters. Attach the final leg poles and you’ll be under cover in a matter of minutes.<\/p>\n

The awning is made from premium 320gsm ripstop polycotton canvas and has an impressive PU 1500mm water rating, plus seam sealing that will keep you dry in extended rainy conditions. Gutter pulls also allow you to fasten additional lines that prevent water from pooling on the awning.<\/p>\n\"\"\n

The three included heavy duty mounting brackets suit most commercially available flat roof rack or steel basket set ups and provide ample support for the awning – they even feature a small hump to clear the edge of your roof rack. You can also mount the Eclipse using the built-in nut channels on the back of the awning body itself.<\/p>\n

Make sure to check the weight rating and suitability of your roof rack and vehicle with appropriate manufacturers prior to purchase. Most OEM roof racks are not compatible with the mounting system. We recommend professional installation through one of our approved installation partners<\/a>.<\/p>\n

The Eclipse 180 is suitable for either side of a vehicle or trailer, and especially suits vehicles where a hatch would interfere with a wrap-around awning. If you have a side-opening rear door, you might want to consider the\u00a0 Eclipse 270<\/a> for maximum coverage at the rear of your vehicle. If you need more coverage, an available wall kit<\/a> significantly increases the amount of shelter provided.<\/p>\n

Extended mounting brackets<\/a> are also available as a replacement or upgrade to the standard brackets. All EC180 awnings ship in two packages – the awning itself, and the standard brackets. All awnings come with standard brackets, so if you need the extended version instead, please contact us.<\/p>\n

SAFETY NOTE:<\/strong> Ensure that your awning is anchored with all legs, straps, guy ropes and pegs at all times when in use. Damage to the awning or your vehicle may occur if the awning is not fully supported. We also do not recommend using the awning in heavy snow conditions due to the weight build-up that snow can cause. Weather damage is not covered under the standard warranty, but we do stock various replacement parts that are available for purchase.<\/p>\n

\"\"
Shown here with optional walls<\/a><\/figcaption><\/figure>\n
KEY FEATURES<\/span><\/h6>\n